Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: longxia on January 01, 2013, 05:11:22 AM

Title: WebAccess Setup - unable to setup. MAC OS Mountain Lion
Post by: longxia on January 01, 2013, 05:11:22 AM

I am trying to set up the webaccess. When I try to enable it, and enter the name (during the setup), then I select save, it thinks for a bit then it shows the following message.:

 

UPnP Gateway not found and/or doesn't support port forwarding, use manual setup.

 

I have also tried the manual setup, but has the same results. I do not know what the manual settings are, or how to enter or access the area to do that.

 

I also read the WebAccess Setup instructions on the Buffalo Forum, but I cannot figure what is the problem.

 

Any help would be great. Thanks.

Title: Re: WebAccess Setup - unable to setup. MAC OS Mountain Lion
Post by: davo on January 02, 2013, 03:36:05 AM

Go to the advanced setup -> disabled UPnP, select external port 9000 -> Apply -> Then forward this port on your router to the IP address of the Linkstation for external access.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 54 (show)
Files included: 27 - 1055KB. (show)
Memory used: 719KB.
Tokens: post-login.
Queries used: 14.

[Show Queries]