Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: mneugebauer00 on November 13, 2012, 08:35:11 AM

Title: linkstation blinking blue
Post by: mneugebauer00 on November 13, 2012, 08:35:11 AM

I had a drive failure in a linkstation, now I cannot access it or anything.  The power LED just blinks blue which means it is starting up.  I have tried unplugging it and rebooting and still nothing.  I have taken out the bad drive as well and tried to boot with just the good drive and still won't boot fully.  Anything I can do?

Title: Re: linkstation blinking blue
Post by: mneugebauer00 on November 13, 2012, 08:48:14 AM

LS-WX4.0TL/R1 Linkstation Duo

Title: Re: linkstation blinking blue
Post by: png on May 22, 2013, 08:59:11 PM

I have a LS-WX2.0TL/R1-AP and the Power LED is blinking blue rapidly non-stop and I can't see or detect it in the netowork.

I followed your instructions to reset the device and both Power and Function LEDs are blinking rapidly non-stop now.

I still could ping it with the IP address but still could neither saw it in the network nor detected by the NAS Navigator2.

May I know what is the next step?

Should I power it down?

 

Thank you in advance for your help.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 55 (show)
Files included: 27 - 1055KB. (show)
Memory used: 733KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]