Buffalo Forums

Products => Storage => Topic started by: overmouse on October 30, 2012, 09:37:37 AM

Title: LS-CHLv2 dead after firmware upgrade, even on EM-mode
Post by: overmouse on October 30, 2012, 09:37:37 AM

Hi guys,

 

My LS-CHLv2's ethernet is completely dead after upgrading the firmware. with no packets whatsoever being sent by the box even on EM-Mode. Given that no packet is being sent by the LS, TFTP is not working as well. I was under the impression that the EM mode boot software wasn't touched by firmware upgrades. it seems like the box is not initialising the ethernet interface properly, given that the physical link is up, but no packets are sent.

 

All this is being done over a direct connection between my computer and the LS.

 

Any ideas?

 

Cheers.

Title: Re: LS-CHLv2 dead after firmware upgrade, even on EM-mode
Post by: davo on October 30, 2012, 10:05:52 AM

post a screen shot of the TFTP boot screen. and a link to the image you are using.

Title: Re: LS-CHLv2 dead after firmware upgrade, even on EM-mode
Post by: overmouse on November 06, 2012, 01:02:38 PM

Hi Davo,

 

TFTP server was running fine, but the box simply wouldn't send any requests. TFTP only worked properly once I've cleared up completely the hard disk and put it back in the box. My guess would be that I've managed to muck up the booting process somehow.

 

Thanks.

 

Title: Re: LS-CHLv2 dead after firmware upgrade, even on EM-mode
Post by: Steverobbins on June 29, 2013, 04:03:37 PM

Please define how you cleaned up the disk. i can only enter EM mode and i dont know what else to do

 

Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 60 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]