I had to send this unit back in because I had problems with the units HDDs. Well I received my unit.today....decided I didn't want to lose data again so I decided to change the unit from a Raid 0 to a Raid 1. luckly I did set up the E-Mail notification for the drive. I logged into the wed access and found where to change it from a Raid 0 to a Raid 1.
Here are the emails I received from the unit
1st one
Test Mail Message
This e-mail notice is to confirm LinkStation functionality.
The LinkStation can be configured using the following URL:
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 19:17:04
Setting Screen: http://10.0.1.13/
2nd one
RAID rebuild notice
RAID mode is changing.
RAID Mode: RAID-Delete
Changed Disk: RAID Array 1(Disk 1 Disk 2)
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:01:37
Setting Screen: http://10.0.1.13/
3rd one
RAID rebuild notice
RAID mode change complete.
RAID Mode: RAID-Delete
Changed Disk: RAID Array 1(Disk 1 Disk 2)
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:03:21
Setting Screen: http://10.0.1.13/
4th one
DISK Error Notification
HDD error occurred
Disk(s) the error occurred:"Disk 1"
Disk cannot be mounted.
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:03:33
Setting Screen: http://10.0.1.13/
5th one
DISK Error Notification
HDD error occurred
Disk(s) the error occurred:"Disk 2"
Disk cannot be mounted.
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:03:52
Setting Screen: http://10.0.1.13/
6th one
RAID rebuild notice
RAID mode is changing.
RAID Mode: RAID1
Changed Disk: RAID Array 1(Disk 1 Disk 2)
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:05:39
Setting Screen: http://10.0.1.13/
7th one
RAID rebuild notice
Error occurred
RAID Mode: RAID1
Changed Disk: RAID Array 1(Disk 1 Disk 2)
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:06:11
Setting Screen: http://10.0.1.13/
8th one
DISK Error Notification
HDD error occurred
Disk(s) the error occurred:"Disk 1"
Disk cannot be mounted.
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:06:31
Setting Screen: http://10.0.1.13/
9th one
DISK Error Notification
HDD error occurred
Disk(s) the error occurred:"Disk 2"
Disk cannot be mounted.
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:06:40
Setting Screen: http://10.0.1.13/
10th one
RAID rebuild notice
RAID mode is changing.
RAID Mode: RAID1
Changed Disk: RAID Array 1(Disk 1 Disk 2)
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:08:11
Setting Screen: http://10.0.1.13/
12th one
RAID rebuild notice
Error occurred
RAID Mode: RAID1
Changed Disk: RAID Array 1(Disk 1 Disk 2)
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:08:44
Setting Screen: http://10.0.1.13/
13th one
DISK Error Notification
HDD error occurred
Disk(s) the error occurred:"Disk 1"
Disk cannot be mounted.
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:09:00
Setting Screen: http://10.0.1.13/
And finally the 14th one
DISK Error Notification
HDD error occurred
Disk(s) the error occurred:"Disk 2"
Disk cannot be mounted.
[LinkStationInformation]
LinkStationName: LS-WXL4A6 (LS-WXL)
Time: 2012/10/20 20:09:09
Setting Screen: http://10.0.1.13/
I have not received any more notifications since.......have restarted computer and link station numerous times to no avail............
I have the red light flashing 6 times. This is the same thing it did before.
HELP