Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: Oliver222 on October 09, 2012, 02:54:29 PM

Title: Unformated partitions after trying to change the raid type
Post by: Oliver222 on October 09, 2012, 02:54:29 PM

Hi,

everything was fine first when running with raid 0 Type. The i tried to change settings to raid1. Maybe i did something wrong, i dont know.

The result is , two unformated partitions ,Raid type is called Array 1 Not configurated EDP.

The buttons above to format disks are grey and inactive.

Anyone who has solved this problem?

Thank you

Title: Re: Unformated partitions after trying to change the raid type
Post by: davo on October 09, 2012, 04:24:53 PM

Meek and firnware?

Title: Re: Unformated partitions after trying to change the raid type
Post by: Oliver222 on October 10, 2012, 12:23:26 AM

The drive is LS-WSXL66E, the firmware version is 1.60

Title: Re: Unformated partitions after trying to change the raid type
Post by: davo on October 10, 2012, 03:36:02 AM

Follow FAQ 2 of 5 in the Storage section to debug the firmware, only section "rebuild partition table" when selecting the debug options. This should reformat the HDDs and clear the EDP error.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 60 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]