Print Page - LS-WVL/E with E16 & E22 Disk 2 was not found

Title: LS-WVL/E with E16 & E22 Disk 2 was not found
Post by: mikejf on September 12, 2012, 12:49:37 PM

Bought a new LS-WVL/E NAS, & put the HD in slot 1, then pressed the button on back to format it. Worked great, Everything was ok.

Got the crazy idea to test slot 2, and moved the only HD I have to that slot (for testing of the NAS's 2nd slot) It worked, but got the error that Disk 1 wasn't found. So I put the HD back into slot 1 and Now get the Disk 2 not found. I then tried the "reset to factory settings". No help, still have the error.

Under System-storage-Disks; Disk 2 shows as disconnected, but the "Remove disk" button is not active.

How do I clear the error so it doesn't look for a 2nd HD?

Firmware:1.60

Thanks Mike F

Title: Re: LS-WVL/E with E16 & E22 Disk 2 was not found
Post by: mikejf on September 13, 2012, 12:47:15 PM

I did the System > Restore/Erase > Erase.

That fixed it. Took 12 hours + writing 00s 4 times, but it's ok now. Thanks

Mike

Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 54 (show)
Files included: 27 - 1055KB. (show)
Memory used: 719KB.
Tokens: post-login.
Queries used: 14.

[Show Queries]

Buffalo Forums

Products => Storage => Topic started by: mikejf on September 12, 2012, 12:49:37 PM