Hi all, I have searched for an answer to my problem but not found an answer... I have:
LS-CH2.0TL-V2
firmware V1.57
I had my linkstation set up to auto power on/off during the week and at weekends which it did without issue, however recently I changed the timer settings to:
timer one
week days
wake up 17:30
sleep 23:45
timer two
saturday and sunday
wake up 00:15
sleep 23:45
however the linkstation will no longer turn itself off. when I check in the morning the power is still on and the blue light is flashing. the unit will not power off even if i slide the power switch to the off position, I have to remove the power to turn it off.
I have restored factory defaults and reprogrammed the timer but this has not resolved my problem.
Any ideas?
Thanks!
I would try following this FAQ to reinstall the firmware.
Thank you, I'll give that a go
Phil
That fixed my problem.
Cheers!
Quote from: Jotin on May 01, 2012, 12:24:44 PMI have a smiliar problem. The link is not valid any more.
<p>I would try following this FAQ to reinstall the firmware.</p><p> </p><p><a href="http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738" target=_blank>http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738</a></p>
Quote from: Florian71 on October 16, 2013, 09:50:36 AMQuote from: Jotin on May 01, 2012, 12:24:44 PMI have a smiliar problem. The link is not valid any more.
<p>I would try following this FAQ to reinstall the firmware.</p><p> </p><p><a href="http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738" target=_blank>http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/96738</a></p>