Buffalo Forums
Products => Storage => : rrvi.photovan August 03, 2018, 03:58:43 PM
-
I have an LS420DF firmware version 1.84 with new computer using Win 10 and problems in connecting - error message indicates it needs SMBv2 and MS WIndows does NOT recommend refreshing with SMBv1 checked.
I do not know how to handle.
-
The LS420 should support SMB v2. Check the SMB settings in the user interface and make sure version 2 is enabled.
-
Thanks for responding - and thanks for patience...
When I map to the LS420 the error message i get is that the device only supports SMB1. Not sure where I find the "user interface" - through setting on the buffalo as administrator?
If I open windows features I could check SMB1 or SIB direct - neither checked. (no SMB2 to check)
-
should have added - in Buffalo settings - SMB is enabled - but I do not see any version indicated...
-
oops- a typo - in program features of control panle - I have options of SMB1 or SMB direct (NO version)
-
SMB Direct is part of SMB3
from
https://en.wikipedia.org/wiki/Server_Message_Block
-
thanks.. great information. The questions still remain -
1) What does the LS420DF10 support - only SMB1 ?
2) do I enable SMB1 on my computer despite WIndows warning not to do that?
3) is there an alternative?
THis did work well on old computer with windows 10 upgrade - just not this new version which is windows 10 pro..
-
with windows 10 you have to use smb2
your nas let you choose smb1 or smb3
do not use smb1
what is you question
-
How to do this...
1 see how to go to refresh windows and can check either SMB1 or SMB direct. I do not see how to enable SMB2.
THANK YOU for any help
-
if you enable SMB direct
you will enable SMB3
this is the successor of smb2
:)
-
Go to advances settings - file server - SMB - to the right hand side is a black arrow - click it - edit - enable smb2 - save the setting.
Reboot the PC.
Done.
-
THANK YOU - that was exactly what I needed.....
Cheers
-
Hi, I have Win 10 pro and I tried to connect my network drive with linkstation LS421. When I tried to map it via Window explorer, Windows tells me I have to use SMBv2.
Does anyone know if LS421 support SMBv2 ? When can I go in Win 10 to verify this setting ?
Any help will be greatly appreciated.
-
Hi, I have Win 10 pro and I tried to connect my network drive with linkstation LS421. When I tried to map it via Window explorer, Windows tells me I have to use SMBv2.
Does anyone know if LS421 support SMBv2 ? When can I go in Win 10 to verify this setting ?
Any help will be greatly appreciated.
Look at what i wrote two posts above yours.