Buffalo Forums

Products => Storage => : mayktoie December 17, 2009, 03:39:37 AM

: LS-QL/1D series webaccess
: mayktoie December 17, 2009, 03:39:37 AM

   

I have port forwarded port 9000 on my router and canyouseeme.org lists my IP as 59.189.57.193 and port 9000 being open.

 

However when i go to buffalonas.com and type in the name of my NAS it seems to go to 

218.186.10.245:9000 and I cant access my Linkstation

 

If i manually input my correct IP address 59.189.57.193:9000 i am able to login but i have to configure the webaccess folder setup to allow anonymous. If i set it to allow all groups/users i get a message saying user is not allowed access to this share

 

Please help. Thanks

: Re: LS-QL/1D series webaccess
: PCPiranha December 19, 2009, 05:14:20 AM

You are using a user that YOU created in user management right (not the admin)?

: Re: LS-QL/1D series webaccess
: mayktoie December 19, 2009, 07:42:22 AM

   

thanks for the reply. yes im using a created user but it's part of the admin group. also why cant i login using just buffalonas.com? i have to type in my ip address manually for the webaccess to function.

 

 

: Re: LS-QL/1D series webaccess
: PCPiranha December 22, 2009, 06:14:03 AM

There isn't a reason it shouldn't work.. are you sure you just don't have to add an exception for your web browser?  If you want PM me you buffalo nas name and I will see if I can take a look at it.

: Re: LS-QL/1D series webaccess
: PCPiranha December 23, 2009, 11:20:05 PM

What do you have typed in the eternal port section of the web interface under service setup?  It looks as though you were trying to run it through port 27.

: Re: LS-QL/1D series webaccess
: mayktoie December 23, 2009, 11:31:20 PM

   

Hi,

 

I previously tried port 27 but have changed it to port 9000 since then.

 

Cheers

: Re: LS-QL/1D series webaccess
: PCPiranha December 24, 2009, 12:12:51 AM

It still shows port 27, try resetting the unit and setting it back up, let me know when its done and I will try it again.

: Re: LS-QL/1D series webaccess
: mayktoie December 24, 2009, 12:28:39 AM

   

Hi,

 

I've reset and changed the port to 9000

: Re: LS-QL/1D series webaccess
: JoshC January 09, 2010, 12:20:37 AM

You do need to make sure that Port 9000 is now forwarded on your router.   They are UDP/TCP.

: Re: LS-QL/1D series webaccess
: mayktoie January 09, 2010, 01:46:10 AM

   

Yes, port 9000 is open on my router.

 

canyouseeme.org  displays port 9000 is open. However it displays my IP address as 59.189.58.15

 

but when i access my router thru buffalonas.com, after i input my router name and hit connect. the page tries to go to 218.186.10.226:9000 

 

: Re: LS-QL/1D series webaccess
: JoshC January 11, 2010, 01:44:08 AM

Your Double Natting you need to bridge your Modem.

: Re: LS-QL/1D series webaccess
: mayktoie January 17, 2010, 01:38:53 AM

   

Hi,

 

Im not double natting. I only have a motorola cable modem and a dlink router. So setting my modem to bridge mode is not possible. 

: Re: LS-QL/1D series webaccess
: JoshC January 18, 2010, 02:23:13 AM

Im sorry for the inconvience but from your IP address your double natting.  It looks like your modem likes to do the routing.

: Re: LS-QL/1D series webaccess
: Thaitawat January 18, 2010, 03:47:14 AM

   

What the model of dlink router?

Because some of the dlink router after already setting need to save / reboot.

 

How to Save/reboot or restart

- Go to menu Tools.

- System menu on the left hand.

- Click Save/reboot or restart.