Author Topic: Portforwarding problems with WBMR-G125 router.  (Read 6138 times)

kiepula

  • Calf
  • *
  • Posts: 3
Portforwarding problems with WBMR-G125 router.
« on: December 06, 2008, 08:37:49 PM »
   

Problem is that the port for torrent seems to be closed even Ive opened it from configuration pages.  Ive tried with UpnP enabled and disabled but nothing seems to work. Everything else works well on router tho. Operation system is Vista 64bit. Routers firmware version is 1.00, Jun 2007, and its 148 bridged. What else should i try? I have also opened the port from software firewall.

 

Im new on this, but i will try to give more info if needed.

 

The picture hopefully helps.

 

http://www.aijaa.com/v.php?i=3203551.jpg

 

 

 

 


marvin

  • Calf
  • *
  • Posts: 12
Re: Portforwarding problems with WBMR-G125 router.
« Reply #1 on: December 08, 2008, 11:14:02 AM »
   For testing purposes you can put the IP of the device your trying to forward in the  DMZ, if you still can not get access then the issue is not port forwarding.

kiepula

  • Calf
  • *
  • Posts: 3
Re: Portforwarding problems with WBMR-G125 router.
« Reply #2 on: December 08, 2008, 12:04:38 PM »
   

Well I tried and not workin :(

 

So it must be someting with NAT right?

 


Paul

  • Big Bull
  • *****
  • Posts: 1223
Re: Portforwarding problems with WBMR-G125 router.
« Reply #3 on: December 08, 2008, 12:43:05 PM »

Could be, try to flash the firmware in the router then set the unit back to factory defaults and try again.

 


kiepula

  • Calf
  • *
  • Posts: 3
Re: Portforwarding problems with WBMR-G125 router.
« Reply #4 on: December 08, 2008, 01:18:35 PM »
   well can u tell where to get the latest firmware since I coudnt find em.

Paul

  • Big Bull
  • *****
  • Posts: 1223
Re: Portforwarding problems with WBMR-G125 router.
« Reply #5 on: December 09, 2008, 10:37:55 AM »
This is a non US model so I can't provide it, have you tried contacting your local support?