linkstation live web configuration and NasNavigator

[lfgalvao]

Why does it take   f o r e v e r    to load each page?

I'm on Lion and I've tried all the browsers. I've tried wifi and cables too.

Also, when transfering files I only get around 11mb/s, even though the mac and the linkstation are connected to a gigabit router with cat6 cables.

 

Another thing, when I'm on NasNavigator and choose to "open" the linkstation, the NasNavigator crashes and nothing happens.

 

And I wont even mention Time Machine performance. The speed is like 1k/s.

 

Thanks

[redz]

hi there all master please help me how to set up my buffalo nas LS-QVL /r5 i made all the setting but if i save in easy web setting the messages show like this: upnp gateway not supported. i made set up evrything in router but there no  luck..

 

port forward: 9000 int-ext port

auto confgi disable. 

 please help..

[Jotin]

lfgalvao, what is the model number of your unit and what is the firmware version?

 

redz, What firmware are you on and what settings have you chosen for webaccess?

[lfgalvao]

Model number: LS-CH2.0TL-V2

firmware: 1.54

[Jotin]

You should be getting around 20MBps over wired. You could try FAQ 2 of 5 to reinstall the firmware. You could also try restoring the interface by going to system then restore/erase and choosing restore. I would also suggest trying to swap out cables and even try plugging the unit directly into your PC to see what kind of performance you get.

[lfgalvao]

If I reinstall the firmware or restore the interface, will I lose any of my files already on the linkstation?

[Jotin]

No you will not.