Hi Paul,
I appreciate your responsiveness. I still can't get it to work. Below is what I have done:
1. Set my PC IP address to 192.168.11.1 and subnet mask to 255.255.255.0. Verified it by going running ipconfig from the cmd prompt.
2. Plugged the Cat-5 network cable from my PC directly into the Terastation.
3. Disable antivirus and firewall
4. Opened TFTP Boot.exe
5. Booted the Terastation into EM mode.
6. Nothing further happens with the TFTP software.
The cmd window just stays at "accepting requests" and doesn't go further than that even after sitting there for several minutes.
The PC detects the Terastation because I can ping it and log into the web interface for managing the device.
Below is the text from the TFTP window:
Preparing to write TFTP configuration settings.
TFTP Configuration settings have been written.
TFTP Server Multithreaded Version 1.4 Windows Built 1.400
Starting TFTP...
alias / is mapped to C:\Users\Mickey\Desktop\recover\TFTP Boot Recovery-LS_Live-
2.13\TFTP Boot Recovery\
listening On: 192.168.11.1:69
listening On: 127.0.0.1:69
permitted clients: all
server port range: all
max blksize: 65464
defult blksize: 512
default interval: 3
overwrite existing files: No
thread pool size: 1
accepting requests..
I really don't know what to do at this point...
Is there something different I need to do given I'm running Vista?