Hi,
I have recently purchased Buffalo Linkstation Live (LS-CH 1TB) NAS drive. I am trying to access the web folder via internet using www.buffalonas.com service.
I have correctly configured my NAS drive for web access and I am able to do so via LAN (hav setup the web access port to 9000 as advised). I have also allowed relevant port forwarding on my Netgear Router to Local IP Address of my NAS Drive (In fact I have setup the Drive in DMZ of my Router so that all port forwarding is done).
Now when I try to access the NAS drive via HTTPS (I have setup SSL for web access) through Local LAN on port 9000 everything works fine. Also if I try to access my NAS drive through www.buffalonas.com/"my_nas_drive" it reseolves correctly to my public IP address of my Router and in my Router Logs I can see hits coming on to my NAS drive local IP (but not on port 9000, some other ports like 6881, 15000 etc) but cant get web access.
The Web access works fine on LAN but not through Internet. Can anyone help me figure out whats worng with the setup or if anything needs to be done on my NAS drive? Also one thing to note - Auto Firewall Configuration does not work in my case, so have to setup web access port on my NAS manualy to 9000.
Regards,
Ketan
Thanks for the info, but I have already done that. The port forwarding is setup properly and when I try to web browse from Internet or LAN, it does resolves to correct IP and port (9000). The only difference is it works over LAN and not through Internet.
Have you seen or tired web browsing the Linkstation drive through Internet? I mean just thinking if this works or not or are there any issues with this functionality. I have the latest firmware (1.07).
Regards,
Ketan
Hello,
I would like to share because I've struggled with a similar issue. By using a different port for public and lan access to the web access feature, I've been able to connect the LinkStation from the outside. Be aware that lan access is set to port 9000 and can't be changed. So, I would suggest you use any other port (eg. 9001 (not 80)) for public access in your web access configuration (service setup option). Make sure in the portforwarding configuration of your router to use 9000 for lan port and whatever you chose for public port.
Sheugel
Hi everybody,
I have exactly the same problem
Will be very happy to find there a solution
Thierry2b.....from France
I am having this same problem was how was this resolved?
Guys, if you can access it locally then the unit and the web access feature are working fine on our end. If it is not working from a remote location then it is a port forwarding issue. I suggest ensuring that your modem does also act as a gateway and that you forwarded port 9000 to the IP of the linkstation.
last time i have web access but this day my port was close and it hard to open again.....
is there a PORT rather that 9000 to used in linkstation?
regards,
I have a more perplexing issue with Web Access.
I cannot access it from within the Local Network let alone through an external connection. I am going crazy trying to figure this out but I simply do not know what is happening. The IP has been set, the shares have been set, the settings and ports have been set, I also set up DynDNS on the router and LinkStation Live, still no result. Even the Android Apps will not connect, though they find the LinkStation.
I believe it may be the router itself cauing the issue, but I will take the input you guys give to get this resolved.
Thank You.
I had the same issue. I could easily access locally but not over the internet. I fixed it after studying up on this networking stuff. I'm definitely new with this.
I found it was definitely like everyone says; port forwarding.
So my setup is my iMac/PC and Linkstation are connected to my NETGEAR ROUTER then to my VERIZON MODEM.
When connected to the ROUTER i could see the LINKSTATION locally but not over the internet.
When connected to the MODEM i could see the LINKSTATION over the internet but NOT locally.
I connected back to the ROUTER and had to forward the IP ADDRESS of the ROUTER via the MODEM.
So I logged into the MODEM, forwarded the appropriate ports/ip address and it worked!
So it definitely makes a difference when connected to the router or the modem. I knew this, but I didn't know how to fix it at first.