Hello,
It has paassed a long time ... and noone doen't seem to know how to fix LS-L500GL into English. I'm sorry but I don't understand Chinese and these FAQ descriptions don't describe my unit. Please, could someone demystify this Buffalo unit into English? Thanks!
Q: "Is your unit in another language and you do not know how to change it back? "
A: Depending on your model number and firmware version this can be done in two different ways.
If you have the older firmware with the options on the left hand side, you will see an icon with a piece of paper with the corner folded. Click on this icon and you will see two drop menu's at the bottom of the page. In the first drop down menu, choose English, or your desired language. Then press the button at the bottom that would be apply. After that , in the 2nd drop down menu, change the windows language to the desired language and then press apply again. A reboot of the browser and or NAS may be required.
For the newer units with the navigation at the top you want to go to "system", which his the fourth option from the left. Here you will see three red headers. Expand the bottom one which would be language. Click on the white button that would be modify settings. You will see two drop down menus. In the first drop down menu, choose English, or your desired language. Then press the button at the bottom that would be save. After that , in the 2nd drop down menu, change the windows language to the desired language and then press save again. A reboot of the browser and or NAS may be required.
For the Terastation 3 ISCSI it will be the 2nd menu at the top from the left and then the 4th red head down. The instructions are the same from there.