Hi guys,
I have this 6 years old buffalo link station duo, with two disks configured in mirroring (RAID1).
The nas was not responding no more on the network, so i tried to access via browser, no answer.
Tried a network scan i can see the ip is 192.168.1.21, tried to access that via browser - no answer
Pinging is working.
Tried to shut down, tried to remove the disks, nothing works.
Last tried I've installed NasNavigator2, can't see the NAS.
So I tried to make a reset using the procedure, turning it off, holding the function button, turning it on, led was blinking, pressed the function button again and waited the NAS to woke up. Nothing happened.
The NAS without the disks is blinking 7 times red, with the disks inside it have the blue light on.
NasNavigator 2 can't see the NAS in any situation, so now what are the chances?
First of all I do need to read the data on one of the two disks (they should got the same content), can I do that with an external USB HDD reader and UFS Explorer professional recovery installed?
or do I need another software?
ALSO, is there a way to repair/hard reset the NAS or I have to trash it and buy another one?
In that case, can I buy an empty NAS and put the disks I have in it?
Thank you