Author Topic: Unable to Setup Web Access  (Read 1922 times)

Lufbra

  • Calf
  • *
  • Posts: 2
Unable to Setup Web Access
« on: September 28, 2009, 11:21:13 AM »
   I am having problem with setting up web access on my Link Station Quad. I do not have any problem web access via www.buffalonas.com with my Buffalonas Name from my home network. When I tried to access from outside my home, I can only connect if I specify my WAN IP:9000, and not from www.buffalonas.com with my Buffalonas Name. Can someone advice what the problem could be? Thanks.

Kameran

  • Big Bull
  • *****
  • Posts: 505
Re: Unable to Setup Web Access
« Reply #1 on: September 28, 2009, 11:24:21 AM »

http://www.buffalotech.com/knowledgebase/users/kb.php?id=10209&category_id=0&sid2=

 

Also make sure you open port 9000 tcp/udp on your router.  Test to make sure you opened the port right by going to canyouseeme.org.


Lufbra

  • Calf
  • *
  • Posts: 2
Re: Unable to Setup Web Access
« Reply #2 on: September 28, 2009, 12:12:30 PM »
   

The current firmware on my LinkStation Quad is 1.11 which I had read on the forum to be very current.

 

My port 9000 tcp/ udp on my router is open, and I can see my port from canyouseeme.org.

 

As I had mentioned earlier, I am able to connect to web access if I connect via my WAN IP from outside my home network. However, when I use www.buffalonas.com, it doesn't work.

 

Please advice on next step. Thanks.