While I have been off this issue for months now. I was kind of hoping that people got this working with some level of detail on how they did? Below is my configuration, and I am still unable to connect ESX (using the iSCSI software initiator) to a TeraStation IS iSCSI (TS-RIGL/R5 F/W 1.01).
Configuration:
- ESX 3.5.0, 123630
- Both Service Console and VMKernel port groups are configured with IP addresses in the Same VLAN. 10.10.0.(2, and 12) <-- Althought if this was not the case, and we were unable to connect because of this, that would have to be a bug. IMO
- iSCSI Software Client is enable of the firewall.
- iSCSI Initiator is enable and configure with an IQN
- Send Target point to the ip address of the TeraStation 10.10.1.100
- TeraStation is a 4 TB Firewire 1.01
Also, the problem is still the same, i am unable to see the LUN and create a datastore on that LUN from the VIC. Here is the output of the esx server:
root@ipqesx01 root# vmkiscsi-tool -L -l vmhba32
Target iqn.2004-08.jp.buffalo:NP-ISCSI-001D73262A48:NP-Backup:
OS DEVICE NAME : vmhba32:3:0
BUS NUMBER : 0
TARGET ID : 3
LUN ID : 0
root@ipqesx01 root# vmkiscsi-tool -T -l vmhba32
NAME : iqn.2004-08.jp.buffalo:NP-ISCSI-001D73262A48:NP-Backup
ALIAS :
DISCOVERY METHOD FLAGS : 0
SEND TARGETS DISCOVERY SETTABLE : 0
SEND TARGETS DISCOVERY ENABLED : 0
Portal 0 : 10.10.1.100:3260
Please let me know if anyone has got this to work. Thanks for your time and help,
Nick
Message Edited by nickmind on 02-25-2009 12:42 PM