Im trying to reflash the firmware. I read somewhere that if I want to reflash the same firmware then I have to boot the uniti into EM mode and edit the LSUpdater.ini? and change VersionCheck = 0?. If TFTP boot is the only option for this unit, below is the intruction that I found from this forum and I dont really understand what does step 4 mention.
It is trying to tell me that boot the device using EM method? which mean I still have to go back to figure out how to boot this unit into EM mode?
1. Directly connect your NAS to your computer via an Ethernet cable (crossover isn't necessary).
2. Set your computer's NIC (Network Interface Card) to a static IP address of 192.168.11.1
NOTE: If you don't know how to change your IP address on your computer you can find out how to do that for Windows (XP, Vista or 7).
3. Run the TFTP program for your respective NAS and have the files extracted to your desktop
4. Boot the device using the EM walkthrough steps. Wait until it says E04, E06, or System Now Booting before going to the next step.
5. Open the TFTP folder and run the program TFTP Boot.exe with the icon:
6. A command prompt similar to the one shown below should appear:
?