LS CHL (Linkstation Live) E06 Error

[radion_auto]

Windows firewall is disabled and Ive never run any sort of 3rd party firewall. Would safe mode help with this maybe?

[Dustrega]

It's possible but I'm leaning towards a corruption occurring within the boot partition of the device.  Try doing the force firmware update with the "Rebuild Partition Table" option checked.  Please note that this will format the drive but this is the only other option I have to get the device working.  If you need data recovered I would recommend seeking out 3rd party data recovery specialist before performing this step.

[Tacobuff]

I bought Linkstation Live LS-CHL1.0TL few days ago, but i have the same problem after to try upgrade at vers. 1.12.

I readed all topics but I didn't result. The version of LS is V2.

 

[davo]

If you have a V2 then firmware 1.12 is NOT for your unit, what is the actual current firmware installed?

[Tacobuff]

Can i see it? From NasNavi I don't see the LS.

[Tacobuff]

I followed step 2 and 3 to TFTP and force firmware, but on the program LSUpdater.exe (vers.1.56) is not able the function Update and don't find the NAS. It explains this error "Linkstation tath needs updating wasn't found".

[Tacobuff]

Someone can help me!!

[Tacobuff]

The previous firmware was 1.31.

[radion_auto]

after around 2 years i finally got chance to have another look at this.

 

i did the tftp boot stage, changed my ip back to auto, flashed with the 1.06 fimware and it works great!

 

thanks for the help guys. :):)