Hello all. I have tried to upgrade my firmware, and keep getting hangups. The same as below from FAQ 2of5. Can anyone help with finalizing the format procedure? NAS IP keeps reverting at the end of the process. It is a LS-WXL2.0TL/R1. I tried also to reach out to the original commenter.
Yet another LS-WXL user.
Have a unit that gives the 6xred, but can be made to EM with function button.
Unit only appears in NASNavi 2.7.1 when you use TFTP v1.33
Using NASNavi you can Autocorrect the IP to become 192.168.11.150
With LS Update 1.68 you can find the unit and it reports the current firmware version as ----
And the update gets you two results.
Ranging from
"No response from ... blah blah blah"
to
"Format Failed, Update aborted."
In NASNavi the drive keeps on defaulting its IP back to 169.254.xxx.xxx and then asking me to autocorrect it back to 192.168.11.150
Does anyone have any tips or suggestions on what to try next?
EDIT: Never mind, with patience and a lot of attempts I finally made it through the update. All works well now.