I just found the solution guyz.. I was able to wake the LinkStation Live (in my home) from my work over the internet, hence enabling me to keep the drive in 'Auto Sleep' mode, but waking it up when I need to access it from work using the Web Access.
Thanks for the last post, which gave me the idea.
1. You need a way to send a WOL magic packet over internet (I used the one from here - http://www.depicus.com/wake-on-lan/wake-on-lan-gui.aspx
2. You'll need to open a local port in your router:
Inbound port: 9 (typically for brodcast messages)
Type: UDP
Private IP: 192.xxx.x.x (this is the local IP of your LinkStation)
Private Port: 9
3. In the GUI you downloded from # 1 above, set these parameters:
- MAC Address: (you can get this from the LinkStation Web Admin page)
- Internet Address: (this is the EXTERNAL ip address of the LinkStation - one u use for your Web Access)
- Subnet Mask: (Typically 255.255.255.0 - but you can get this from the LinkStation Web Admin page)
- Send Option: (Internet)
- Remote Port Number: 9
4. Click 'Wake me up'.
5. Wait a few seconds and then load your 'Web Access' page - you'll be prompted for your password!
Good luck