Hi,
I currently have a WHR-HP-G54 as my wireless router. I have a WLI-TX4-G54 wireless ethernet converter which connects my xbox 360 and my DISH receiver. Worked fine - simply connected it via AOSS and I was good to go.
I'm trying to add another access point for my stepson so he can connect his xbox 360 and dish receiver (same network). I bought another WHR-HP-G54 router. I've set it to bridge mode via the underside switch. I tried AOSS and the AOSS lights kept flashing with no connection. I've tried the whole manual setup according to the manual. I can talk to the bridge when it's hard wired to the router, but after I disconnect - no joy. I have MAC addresses listed in both, WDS enabled, same channel, DHCP enabled on the router.
It seems like it might connect wirelessly sometimes, but when I try an xbox live connect, it can't retrieve an IP from the router. I'm not sure at this point if it's because the bridge isn't connected or if there's a config issue somewhere with the xbox.
I think I'm going to try setting an IP address on the bridge and using that.
Am I missing something? I did find a Microsoft KB item about opening ports, so I will try that also, although I didn't have to do that with the ethernet converter box.
Any help is greatly appreciated.