I'm about to set up a small wireless network with support for isolated guests, and non-isolated employees. Does WAPS-APG600H suppoert client isolation, and if so does it work by ssid/vlan e.g in one ...
This is driving me up a wall... I have a WZR-300HP running buffalo flavor DD-WRT v24SP2-MULTI (07/09/12) std - build 19438 Ran into a problem setting up guest wifi network. Followed instructions ...
No matter what I tried the txpower of my router is still limit at 16.5 dBm (EIRP av.) using lastest buffalo dd-wrt firmware? This can't be hardware limitation because I've seen this router can go ...
Hi, Recently I have bought Buffalo WZR-HP-G300NH2 firmware build 19154 (latest) and have set up port forwarding to expose my home http server (port 80) and SSH daemon (port 22), server is working a...
I just moved to Tokyo and bought the WHR-300HP in Akihabara. I'd like to be able to read the interface (my Japanese level is 'very basic'), and I see that there's firmware available for this model ...
I emailed "support" about my router's poor usb performance, and this is what they said with my responses: Thank you for contacting Buffalo Technologies. In regards to your query, there ar...
I have two WZR-HP-G450H and have them setup as WDS AP and WDS Station. The WDS AP works fine and I don't have any issues with it but the 2nd one, the WDS Station is having issues. Both routers have F...
...theoretically appropriate modes, WDS or Client Bridge (Routed), it does not create a true network bridge, where two LAN segments are completely and seamlessly combined. 1) UPnP requests will not be relayed...
I have a bridged set up using two of the WZR-HP-G300NH2 in my home. Equipment setup - UPSTAIRS: Router 1: WZR-HP-G300NH2 (Set as WDS AP; connected to the DSL Modem on the up-port ; and Gb connections...
