Reply
Juvenile
PRPechek
Posts: 40
Registered: ‎07-20-2011
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

Ben,

 

Let me say first that I am sorry for your lack of support from one of our techs, I will make sure that it is addressed.

 

As for the LS-CHL v.1 I have been told that our engineers are working on the firmware for the currently shipping models and then they will release updates for the previous generation, unfortunately, I was not given a timeline.  I am going to assume that it will most likely be the end of August/early September but, again, that is an assumption.  I have asked for clarification.

 

Again, I am sorry for your lack of support.

 

Regards,

 

Jay Pechek

Public Relations Manager

Buffalo Technology

_________________________________

Office 512.349.1333 | Mobile 512.739.7275

11100 Metric Blvd Ste. 750 | Austin, TX 78758

jayp@buffalotech.com

www.buffalotech.com

_________________________________

Follow us, and join the discussion!

facebook.com/buffalotech

twitter.com/buffalotech 

forums.buffalotech.com

_________________________________

 

New Born
NYSpursFan
Posts: 3
Registered: ‎07-22-2011
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

[ Edited ]

I regret to report that this update didn't work with my LS-WXL53D. I'm ok until the unit starts Rebooting and counting down, but then I get an error message and the red "Info/Error" light is blinking on the NAS unit itself. Wait. Hold on. The Rebooting process started again, the red Info/Error light is off, and the Power light is blinking. Rebooting in 60 seconds....59...58....57.....now it's Rebooting again.....with the blinking Power light....I seem to be stuck in a cycle here. Now what? 

 

Hold the phone! It worked after all! The update went through 3 or 4 reboots, but then it stopped. I then asked for a manual Time Machine backup, and it started backing up as normal. Hooray!!

 

The update continues to chug along. I haven't updated TIme Machine in ~2 weeks, and this update is taking awhile to backup >13 GB. But it looks like all is well. 

Juvenile
spooky
Posts: 28
Registered: ‎05-09-2009
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

I have to say that it really is not acceptable. I am supposed to wait without any backups and possibly lose valuable data due to an issue that you should have been aware of for quite some time. Other providers appear to have this in hand - why have Buffalo not been on top of this? I will now have to consider buying new equipment that will actually work.

Tonka
davo
Posts: 4,076
Registered: ‎10-24-2008
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ


spooky wrote:

I have to say that it really is not acceptable. I am supposed to wait without any backups and possibly lose valuable data due to an issue that you should have been aware of for quite some time. Other providers appear to have this in hand - why have Buffalo not been on top of this? I will now have to consider buying new equipment that will actually work.


It will work, as has been stated several times, just use FTP!!!

*****My views are my own and not that of Buffalo Technology!*****
My Stuff: TS-XL/R5, TS-HTGHL/R5, TS-QVHL/R6, WHR-HP-G300N x 2, WMBR-HP-GN, LS-CHL-V2, CS-WVL, WHR-G54S, HD-WLU2, WZR-HP-AG300H, HD-HTGL/R5, HD-HCU2 x 3, HD-PEU3 to name a few! :-P Always ensure you have a backup! And no... RAID IS NOT a backup!
Juvenile
spooky
Posts: 28
Registered: ‎05-09-2009
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

FTP? Are you serious? I don't get the point of your response. You know full well that Time Machine backups are what I am talking about. Are you sure you don't work for them, as you certainly seem to defend them very actively.

Tonka
davo
Posts: 4,076
Registered: ‎10-24-2008
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

[ Edited ]
No I dont work for them.
Your question: "I need to access data"
My response: "use FTP"

Don't forget, nothing changed on the buffalo, it is Apple that broke your TM! You yourself seem them blame
everyone but Apple!
You need to face the facts:
1. Your unit is discontinued
2. Buffalo have provided updates for there current devices.
3. Other manufacturer so far (the majority) have only updated there current range for the lion issue
4. The issue for your unit will be resolved given time, as stated, your devices is discontinued and so is not priority.
Btw: I dont always defend Buffalo, what I do is look at it from both sides and give my opinion. In this case (again in my opinion) you are wrong!
Just wait for the fix and stop moaning about it FFS!
*****My views are my own and not that of Buffalo Technology!*****
My Stuff: TS-XL/R5, TS-HTGHL/R5, TS-QVHL/R6, WHR-HP-G300N x 2, WMBR-HP-GN, LS-CHL-V2, CS-WVL, WHR-G54S, HD-WLU2, WZR-HP-AG300H, HD-HTGL/R5, HD-HCU2 x 3, HD-PEU3 to name a few! :-P Always ensure you have a backup! And no... RAID IS NOT a backup!
Visitor
wmuckell
Posts: 1
Registered: ‎08-05-2011
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

I have a LS-CHL now with 1.5.3 beta firmware. But my Time Machine is telling me that AFP is not working. 

 

Does anyone have an setup instructions for setting this up to work with Lion Time Machine??????

 

I.E. Do I have to mount it somehow first using afp?????  I have been mounting the drive using smb://

New Born
NYSpursFan
Posts: 3
Registered: ‎07-22-2011
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

Update: Time Machine has been working perfectly with my LS-WXL53D since I updated the firmware on 1 August. 

Juvenile
ajreynolds23
Posts: 16
Registered: ‎07-21-2011
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

Davo,

 

I disagree,  where does it say that if an item is discountinued , it has 'lower' priority. Furthermore, if it is still under warranty, it should have the same priority as active products.

 

The only folks that woud lower the priority are lazy Sr Managers in Development and Support who don't want to do their jobs and support the customer

 

Visitor
tarbob
Posts: 3
Registered: ‎05-20-2009
0

Re: Mac OS 10.7 Issues w/ Time Machine - PLEASE READ

And FTP doesn't work for USB drives that are plugged in to the LinkStation