Reply
Visitor
tiantian
Posts: 5
Registered: 09-27-2009
0

Firmware downlaoding hung!

To Buffald Tech Support Team:

 

I failed to download my LS-CH500L firmware online. It always hang around 35MB downloading. Can you check your download files and have this problem fixed.

 

Thanks!

 

Tiantian

Running Bull - Moderator
JoshC
Posts: 784
Registered: 03-01-2009
0

Re: Firmware downlaoding hung!

Are you downloading it wireless?  You shouldnt download it wireless it will corrupt it.   IF your downloading it hardwired then its a problem on your end.  Are files are fine.
** No trees were harmed by the transmission of this message. However a few
million electrons were temporarily inconvenienced.**

Google is your friend.
Visitor
tiantian
Posts: 5
Registered: 09-27-2009
0

Re: Firmware downlaoding hung!

Thanks. I can download it now.

 

The next question is can I skip fw1.07 and run fw1.21 directly?

 

Thanks!

Running Bull - Moderator
JoshC
Posts: 784
Registered: 03-01-2009
0

Re: Firmware downlaoding hung!

Which firmware do you currently have?
** No trees were harmed by the transmission of this message. However a few
million electrons were temporarily inconvenienced.**

Google is your friend.
Herd Member
davo
Posts: 499
Registered: 10-24-2008
0

Re: Firmware downlaoding hung!

if you have anything lower than 1.07 already installed then you are using revision 1 of that unit. In which case 1.07 is the latest.
People should NEVER depend on one system to store all there data! ALWAYS backup your data to another device!
Visitor
tiantian
Posts: 5
Registered: 09-27-2009
0

Re: Firmware downlaoding hung!

v1.01

 

I think I can't skip v1.07, right?

 

Thanks

Running Bull - Moderator
PCPiranha
Posts: 1,876
Registered: 02-19-2009
0

Re: Firmware downlaoding hung!

No you have the version one, so you cannot use firmware 1.10 and above.
Visitor
tiantian
Posts: 5
Registered: 09-27-2009
0

Re: Firmware downlaoding hung!

You mean that I can only updagrade my firmware from v1.01 to v1.07 and can't upgrade to v1.21 from v1.07? Thanks!
Herd Member
Memoryman
Posts: 241
Registered: 11-17-2008
0

Re: Firmware downlaoding hung!

version 1 of that product currently stops at 1.07

version 2 uses different hardware and controller chip, requiring different Firmware code. It's Firmware revision begins at 1.10

Visitor
tiantian
Posts: 5
Registered: 09-27-2009
0

Re: Firmware downlaoding hung!

Thanks, MemoryMan!

 

I am going to run fw1.07 now and forget about fw1.21.