Reply
New Born
Demoking
Posts: 1
Registered: ‎04-02-2009
0
Accepted Solution

Firmware for terastation

Hello I have a HD-H1.0TGL/R5 with Firm 1.12 this is so slow that its about unuasable ,

Ive read that a firmware upgrade would help  I cant find the proper firmware and if you can help with the speed ?

Thanks Roger 

Tonka
Dustrega
Posts: 1,383
Registered: ‎12-05-2008
0

Re: Firmware for terastation

You can download the latest firmware here which will probably help in speed of access on the drive. Are you accessing the NAS by it's hostname or the IP address?
Greatest explanation of the basic internet function.

Please be sure to read the Guidelines before posting as well as the FAQs [1,2,3 and 4] along with the General FAQ. Your question may already be answered.

I chuckled at this, but in all honesty it is useful for forum posting. Not just here, but every forum.
Visitor
vositis
Posts: 3
Registered: ‎04-08-2009
0

Re: Firmware for terastation

I was having a similar problem and installed the suggested firmware upgrade.

 

The good news is that it fixed the problem, and I can once again reliably access the Terastation.

The bad news is that the Terastation interface is now entirely in Japanese.

 

Is there an English version of this firmware?

 

Thanks,

 

-VO 

Tonka
JoshC
Posts: 1,110
Registered: ‎03-01-2009

Re: Firmware for terastation

Sometimes when you update the firmware it will revert it to another language.  Try this.  Get into the interface and you will see the tabs on the left hand side click on the second one and go all way to the bottom you should see the language change it to english and close the browser out and reopen it that should fix your problem.
** No trees were harmed by the transmission of this message. However a few
million electrons were temporarily inconvenienced.**

Visitor
vositis
Posts: 3
Registered: ‎04-08-2009
0

Re: Firmware for terastation

The second tab doesn't have any language settings I can identify.  The sections appear to be in Japanese, but each has some english.. I'll try to describe the sections that I do have:

 

The first one appears to be the system name.  There are two fields, both starting with TeraStation and both contain TeraStation (the first in all upper case).  TeraStation is the network name of the device - how's that for imagination!)

 

The second appears to be a time setting.  It allows setting the time date and time zone.

 

The third refers to NTP.  A pair of radio buttons of which the second is selected, and a blank edit box.

 

THe fourth might be operating system type?  There are two drop down lists.  The first has two options and no description I can decipher.  The second description starts with "Windows****" and the drop down has 15 choices of which .....SJIS(CP932) is selected.  Other options include ISO either (CP###) or (ISO#######).

 

The fifth, and last section seems to turn on/off FTP and AppleTalk.  There are two pairs of radio buttons.  I can't read the labels, but the descriptions are AppleTalk**** and FTP****

 

That's it.  Under that is a button that I would assume says  'OK' or 'Save' or something.

 

Hmm... looking at the HTML source of the page (the HTML is in English) the first drop down in the fourth section has two options defined as 'japanese' (selected) and 'english'...

 

-VO 

Visitor
vositis
Posts: 3
Registered: ‎04-08-2009
0

Re: Firmware for terastation

That was it.  The first drop-down, in the fourth section of the second tab selected the language.

 

Both options are in Japanese on the screen, so you just have to choose the other one.  The second drop-down is the "Windows Client Language", which I also changed to the second one "CP437 (United States, Canada)".

 

Thanks for the help!!

 

-VO