I don't know how to get a local image/screen shot into a message on this board.
NAS address = 192.168.1.101. My IP with Comcast is dynamic.
Webaccess service
Volume "Share" has attributes of Read & Write, and its Webaccess settings are "Use inherited..."
WebAccess service = enabled
HTTPS = disabled
Use BuffaloNAS = enabled
DNS Hostname = blank
UPnP = enabled
External port = 35077
NAS Internal Port = 9000
Exclusive session = disabled
Expiration time = 30
On my Linksys WRT54GL admin page, I'm assuming that what I see (under Applications & Gaming) called "Port Range Forward" is where I set port forwarding.
My application name = NAS
Start = 9000
End = 9000
Protocol = Both
Ip address is 196.168.1.101
Enabled
Same settings for port 35077
I also have the option to set "port triggering," on the linksys. Do I need to? It didn't seem to do anything...
Under the Administration > Management tab on the Linksys, Route Router access is disabled, and UPnP is ENabled.
What else do you need, to help me?
Thanks