Author Topic: Error (or information) code 53 for CloudStor  (Read 3391 times)

rbetterley

  • Calf
  • *
  • Posts: 5
Error (or information) code 53 for CloudStor
« on: February 08, 2012, 03:23:57 pm »

My CS-WV/1D is flashing an Info or Error code 53. †I can't find what this code means.

After booting the drive, I get 5 long and 3 short amber flashes, which according to the manual(!) means an information code 53. †But, the manual doesn't have a code 53. †I must be missing something here.

Any suggestions what this code is or if I am misinterpreting it would be appreciated.

I am using Windows 7 and the drive is on my network.

Thanks in advance


rbetterley

  • Calf
  • *
  • Posts: 5
Re: Error (or information) code 53 for CloudStor
« Reply #1 on: February 08, 2012, 03:34:00 pm »

So, there is a new manual and it includes a new information code, 53, which means that the device can't communicate with the Cloud †service. †Maunual came out late January 2012.

Answered my own question for a change; now I need to find out why the code!


Jotin

  • Big Bull
  • *****
  • Posts: 4201
Re: Error (or information) code 53 for CloudStor
« Reply #2 on: February 09, 2012, 09:12:08 am »

Usually this code comes from the unit being blocked by a firewall on your router. You can try opening up these ports or enabling UPNP.

 

All ports are both inbound AND outbound

  • TCP 80, 443 for Authentication
  • UDP 4365 for File Transfers
  • UDP 3333 for Local Traffic

washcorp

  • Calf
  • *
  • Posts: 1
Re: Error (or information) code 53 for CloudStor
« Reply #3 on: April 16, 2020, 03:16:13 pm »
I am getting error code 53 on my Cloudstar CS-WX1.0\1D; noting 'can't reach cloud services' as pogoplug is no longer reachable. How do I resolve?  Thanks

1000001101000

  • Debian Wizard
  • Big Bull
  • *****
  • Posts: 739
  • There's no problem so bad you cannot make it worse
Re: Error (or information) code 53 for CloudStor
« Reply #4 on: April 16, 2020, 07:38:20 pm »
I think @oxygen8 made a post a while back with a method for installing the ls-wxl firmware on this device. Iíve never tried that personally.


You can install Debian Linux on this device using the lswxl installer (I actually used a cxl for testing).
https://github.com/1000001101000/Debian_on_Buffalo