Author Topic: What is the default admin-name and its password to BitTorrent in LinkStation?  (Read 4863 times)

omabuffis

  • Calf
  • *
  • Posts: 11

I enabled BitTorrent server. I press "Open Downloand Manager" > it asks those data at http://192.168.0.102:9090/gui/

 

I give them my admin username and password unsuccessfully. I try also unsuccessfully other usernames and passwords.

I have changed my admin-name. I also tried simply my current admin password with username "admin" unsuccessfully.


omabuffis

  • Calf
  • *
  • Posts: 11

According to manual: "You will also need to forward one port in your router's NAT table (port 9090)." at http://www.buffalotech.com/technology/software/bittorrent-utorrent/. So that means I need to go to my Dlink and set there a port forward to the given port.


omabuffis

  • Calf
  • *
  • Posts: 11

Ok, unable to set up the given port to my D-link Dir-645. What should I have at: http://imageshack.us/photo/my-images/3/screenshot20120124at414.png/ ?


omabuffis

  • Calf
  • *
  • Posts: 11

I left the box UPD blank. Is that right?

 

I have now: http://imageshack.us/photo/my-images/408/screenshot20120125at229.png/


omabuffis

  • Calf
  • *
  • Posts: 11

Still the my password and admin-username are not working the Micro-torrent -application: http://imageshack.us/photo/my-images/710/screenshot20120125at232.png/


juliantchan

  • Calf
  • *
  • Posts: 27

Texts of image attached in above suggested clearly that:

1. You have entering into page (192.168.0.102:9090),

2. The server is uTorrent and

3. It asks for User Name and Password

4. Youtr D-Link port forwarding (9090) is correctlty defined

 

The user name and password requested here (http://192.168.0.102:9090/gui/) is the BitTorrent admin name and password.

It is different from the name and password you have used to access Navigator (http://192.168.0.102/static/root.html#).

If you have not changed the BitTorrent user name and password, then, you can use the default as in below:

user name = admin

password = "blank" or just hit Enter (i.e. no password)

You may refer to page 116 of LinkStation User Manual for detail.

 

I would suggest you performing below before your next attempt

1. Disbale BiTorrent

2. Enable BitTorrent

3. Run (click) "Initialize BitTorrent Settings" 

 

Hope this is helpful.

Goofd luck...

--JC