Author Topic: "404 Page Not Found Error" in Linkstation LS-CH1.0TL  (Read 4921 times)

Furio

  • Calf
  • *
  • Posts: 3
"404 Page Not Found Error" in Linkstation LS-CH1.0TL
« on: October 22, 2011, 04:41:53 AM »

Hi all,

 

We have an annoying issue with our new Linkstation LS-CH1.0TL?: we get a '404 Not Found' error when connecting to the web administration address. What's worse is that, event though we can ping the NAS, when this condition occurs we cannot reach the shared folders too.

The only way to get access again is to reboot the device, but some time after we get the error again.

 

We already updated the firmware to the latest version available (1.54).

 

Any help appreciated.

 

Furio


ESCHER

  • El Toro
  • ****
  • Posts: 419
Re: "404 Page Not Found Error" in Linkstation LS-CH1.0TL
« Reply #1 on: October 22, 2011, 02:23:33 PM »

Are you using a fixed IP address?

Maybe you have a duplicate IP address in the network.

 


Devil

  • Calf
  • *
  • Posts: 1
Re: "404 Page Not Found Error" in Linkstation LS-CH1.0TL
« Reply #2 on: October 22, 2011, 03:14:50 PM »

hi.

 

I got the same error because i got a new IP :smileywink:

 

just go to CMD

 

type: ipconfig/all

 

close

 

try again....

 

And it works


Furio

  • Calf
  • *
  • Posts: 3
Re: "404 Page Not Found Error" in Linkstation LS-CH1.0TL
« Reply #3 on: October 24, 2011, 05:22:11 AM »

Hi,

 

thanks for your replies. The IP address is assigned statically by the DHCP, so it never changes. Moreover, as said we can ping the NAS by IP, so it seems a webserver issue, not an IP issue.

 

Any other ideas?

 

Thanks in advance,

 

Furio


ESCHER

  • El Toro
  • ****
  • Posts: 419
Re: "404 Page Not Found Error" in Linkstation LS-CH1.0TL
« Reply #4 on: October 24, 2011, 09:59:59 PM »

Maybe a forced firmware update can help.

Read FAQ (2 of 5).


Furio

  • Calf
  • *
  • Posts: 3
Re: "404 Page Not Found Error" in Linkstation LS-CH1.0TL
« Reply #5 on: October 25, 2011, 04:14:50 AM »

Hi Escher,

 

if you mean this, I'll try it ASAP and let you know.

 

Thanks a lot.

 

Furio


ESCHER

  • El Toro
  • ****
  • Posts: 419
Re: "404 Page Not Found Error" in Linkstation LS-CH1.0TL
« Reply #6 on: October 25, 2011, 08:55:21 AM »
Yes, the firmware will be reintalled without touching the data. If yuo are updating, you dont need debug, but if you want to reintall the same version, then you have to force it.

carloes

  • Calf
  • *
  • Posts: 3
Re: "404 Page Not Found Error" in Linkstation LS-CH1.0TL
« Reply #7 on: January 10, 2013, 07:41:50 AM »

I fixed this by clearing the cache.  Hope this helps those stumbling on this thread.