Author Topic: LS-XH1.0TL NAS will not accept password after firmware update  (Read 34422 times)

Frelab

  • Calf
  • *
  • Posts: 1
Re: LS-XH1.0TL NAS will not accept password after firmware update
« Reply #60 on: February 05, 2012, 10:06:22 AM »

Hi  there

 

Since the last ifrmware update (1.56),  id and password seems to be unknown from my LS-CH1.0TL...

 

Some helps would be grateful !

 

I'm going to PM my email to you Dayo

tks for helps


ToddvilleBob

  • Calf
  • *
  • Posts: 2
Re: LS-XH1.0TL NAS will accept password after firmware update
« Reply #61 on: February 06, 2012, 11:55:09 AM »

Davo,

can you provide this information as well?  I have a LS-CH1.01 that we can no longer access the admin pages, and the client needs to update some things.  

 

Thanks a mil!

 

Bob

bob@gonexustech.com


racoope

  • Calf
  • *
  • Posts: 1
Re: LS-XH1.0TL NAS will not accept password after firmware update
« Reply #62 on: February 19, 2012, 05:14:16 PM »

I am having the same problem. I just upgraded to firmware 1.56 an cannot log in.

I also cannot seem to map shares and get an errror "Remote default share is missing".

THis is killing me. Can you advise  ?

Thanks.

racoope@optonline.net:          manfrustrated:


gnbasfl

  • Calf
  • *
  • Posts: 1
Re: LS-XH1.0TL NAS will not accept password after firmware update
« Reply #63 on: February 27, 2012, 05:56:37 PM »

Davo,

 

I, too, have the same problem. After I had a hard power fail, I managed to get the LS-XH1.0TL drive back by installing the 1.56 firmware, but then ran into the same problem where it would not accept admin/password.

 

After search the forum, I find all kinds of references to LSrecovery.zip, but no way to actually download the file other than by personal appeal to you. HELP!!!

 

Email: gordonbrowne@cfl.rr.com

 

The total lack of support from Buffalo is appalling... maybe a multi-million-dollar class-action lawsuit from disgruntled customers might get their attention...

 

Thanks!


noeffort

  • Calf
  • *
  • Posts: 1
Re: LS-XH1.0TL NAS will not accept password after firmware update
« Reply #64 on: February 28, 2012, 04:33:06 PM »

Same problem here too, PM'ing you Davo


guasto

  • Calf
  • *
  • Posts: 1
Re: LS-XH1.0TL NAS will not accept password after firmware update
« Reply #65 on: March 09, 2012, 07:09:19 AM »

i'm having the same problemen.

 

Nowhere is the lsrecovery.zip file active!

 

I'll send you a mail dave. Hope you can help me!


robformosa

  • Calf
  • *
  • Posts: 1
Re: LS-XH1.0TL NAS will not accept password after firmware update
« Reply #66 on: March 18, 2012, 11:21:28 AM »

Davo,

 

Can you please send me the LSRecovery as i had a proble same as the other here - i've updated to Firmware 1.56 and the password was changed.

 

email: robformosa@gmail.com

 

Thanks


SteveDan

  • Calf
  • *
  • Posts: 2
LS - CHL re flashed 1.56 cant access drive user name password
« Reply #67 on: March 18, 2012, 06:17:09 PM »

Hi Dave

Can you help me as well please, reflashed NAS LS _CHL after  it EM'd but i cant access it anymore through web settings as password and user name are not valid.  I have tried to force reflash it but it requires password and i cant get it to work either. 

 

Thanks
Steve

stevedan@ntlworld.com 


huixin

  • Calf
  • *
  • Posts: 5
Re: LS-XH1.0TL NAS will accept password after firmware update
« Reply #68 on: March 25, 2012, 10:38:15 PM »

I have a same problom,

pelease send  me email

 

qinhx96@gmail.com


huixin

  • Calf
  • *
  • Posts: 5
how to get the file?LSrecovery.zip
« Reply #69 on: March 25, 2012, 10:43:53 PM »

how to get the file?LSrecovery.zip,

 

every url cannot get it.

http://www.filesonic.com/file/oQrgexV


huixin

  • Calf
  • *
  • Posts: 5
good. It work again.
« Reply #70 on: March 25, 2012, 11:11:09 PM »

http://forums.buffalotech.com/t5/Storage/Can-t-reset-admin-password-for-Buffalo-Linkstation-LS-CHL/td-p/77711/page/5

 

thank you very much

 

Juvenile
DanMason
Posts: 14
Registered: 08-26-2011
 
0
 
Re: Can't reset admin password for Buffalo Linkstation LS-CHL

SteveDan

  • Calf
  • *
  • Posts: 2
Re: good. It work again.
« Reply #71 on: March 26, 2012, 11:52:50 AM »

Thanks

All working again


drmemory

  • Big Bull
  • *****
  • Posts: 1147
Re: good. It work again.
« Reply #72 on: April 17, 2012, 11:09:53 AM »

after loss of password, have you tried to initialize the unit? Please include FW and part number of unit., and whether you were in EM mode, or just updating the firmware.


tommo

  • Calf
  • *
  • Posts: 2
Re: LS-XH1.0TL NAS will not accept password after firmware update
« Reply #73 on: July 26, 2012, 10:05:37 AM »

I have just run into this same problem.  Any chance you could share your fix with me.  Seems you have successfuly rescued a few folk already


davo

  • Really Big Bull
  • VIP
  • *
  • Posts: 6149
Re: LS-XH1.0TL NAS will not accept password after firmware update
« Reply #74 on: July 26, 2012, 10:07:35 AM »

tommo wrote:

I have just run into this same problem.  Any chance you could share your fix with me.  Seems you have successfuly rescued a few folk already


Model number?

 

PM me for TFTP / Boot Images / Recovery files  LSRecovery.exe file.
Having network issues? Drop me an email: info@interwebnetworks.com and we will get it fixed!