Author Topic: LinkStation Won't Come Up After Power Outage.  (Read 1572 times)

dawggie

  • Calf
  • *
  • Posts: 3
LinkStation Won't Come Up After Power Outage.
« on: February 27, 2013, 03:20:32 PM »

I have the LSQV8.0TL/R5 attached to a Windows XP workstation.  I had a power outage, and now the LinkStation is not recognized by my computer.

 

The indicator light is flashing red - two long, three short.  The disk lights are 1-green, 2-orange, 3-orange, 4-green.

 

I called Buffalo Tech Support and was advised to get two new disks to replace 2 and 3, which I have done with compatible disks from the the list on the Buffalo web site.
  I was advised to replace one disk first, boot and rebuild, then replace the second disk.

 

I have replaced one disk, but the LinkStation is still not recognized by my computer.

 

Is there something other than replacing the disks that I should be doing first?

 

Thanks!