Author Topic: 152:An Unknown Error Occured - Update to Firmware 1.42 Is Solution  (Read 14732 times)

Irmamusic

  • Calf
  • *
  • Posts: 3
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #15 on: July 18, 2011, 09:20:25 AM »

Follow up - 3pm UK time

 

Upgraded NasNavigator to 2.34 - now on front page of web access I'm being informed that new firmware is available. The link takes me to maintenance which has a note about 1.43 - click on check for update tells me that a new version of firmware is available - but no sign of 1.43 on the Buffalo Support web site yet.

 

Andstyles - I suggest that you try attaching Linkstation with ethernet cable to prove it works ok - Does for me

 

However, if it does, when you attach the Linkstation back to your network there are problems with IP addressing. So shutdown restart Linkstation, Router and NasNavigator and maybe the PC you attached by ethernet cable and Linkstation should appear again on the network, albe it with a solid amber light. Good Luck

 

I assume at sometime 1.43 will appear on the Buffalo site

 

 


Irmamusic

  • Calf
  • *
  • Posts: 3
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #16 on: July 18, 2011, 11:36:46 AM »

The update to 1.43 is at the bottom of the firmware change log on the system maintenance page - scroll down from update firmware button


HFH

  • Calf
  • *
  • Posts: 12
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #17 on: July 18, 2011, 02:12:35 PM »

The version for Europe is 1.42.

I was advised not to use the 1.43 firmware from the USA site.

My box was bought in Europe.


andstyles

  • Calf
  • *
  • Posts: 16
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #18 on: July 18, 2011, 05:15:26 PM »

Irmamusic - thanks! I'm already running 1.43 now, but at last I know where to find the update button in the webadmin. It was staring me right in the face!


andstyles

  • Calf
  • *
  • Posts: 16
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #19 on: July 18, 2011, 05:23:54 PM »

HFH - you're right, we should only install our region's firmware.

 

But v1.42 was a disaster, and in v1.40 it wouldnt wake itself up to perform the scheduled backups.

 

v1.43 - it does wake itself up but it reported read/write errors with the external HD thats plugged into the back. Hoping its just teething problems, because theres no issues writing to the HD when I hit the backup button manually when its awake.

 

If I get more errors from tonight's schedule then I will be going back to FW1.34!  I've spent more time than I care to sorting this out


HFH

  • Calf
  • *
  • Posts: 12
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #20 on: July 19, 2011, 07:25:21 AM »

Hello Andstyles,

 

Your worries about backup issues on 1.42 & 1.43 will keep me on 1.34 firmware with my primary NAS.

I upgraded my old (backup) NAS to 1.42 (Europe version).

When you keep having problems contact Europe SupportDesk, I am very happy about there support, had two cases solved with there support.

 

 


omcgill

  • Calf
  • *
  • Posts: 2
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #21 on: September 04, 2011, 09:20:00 PM »

Hi,

 

I have a brand new LS-WX2.0TL/R1 with 1.43 firmware, the NASNavigator2 NAS ICON has a big question mark on it and when you move the cursor over the NAS ICON the last line in the info block says 152: "an unknown error occurred", also the info/error light is orange. In spite of this, the unit seems to be storing items in the share.

 

What's going on?


davo

  • Really Big Bull
  • VIP
  • *
  • Posts: 6149
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #22 on: September 05, 2011, 01:41:15 AM »
Again it just means a newer firmware (1.54) is available for your linkstation.
PM me for TFTP / Boot Images / Recovery files  LSRecovery.exe file.
Having network issues? Drop me an email: info@interwebnetworks.com and we will get it fixed!

omcgill

  • Calf
  • *
  • Posts: 2
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #23 on: September 05, 2011, 08:46:59 AM »

"Again" implies that it's been said once in this thread, not so.

As it is, what has been said in this thread is that since firmware version 1.34 there have been several still-born versions of firmware, 1.40, 1.42, & 1.43, not a real confidence builder, especially when the users are saying they are reverting to version 1.34. FYI I did find the version 1.54 firmware on my own, in the downloads section and it now functioning properly. The thread needs to be re-named with the last part of the name being "Firmware 1.54 is solution".


davo

  • Really Big Bull
  • VIP
  • *
  • Posts: 6149
Re: 152:An Unknown Error Occurred - Update to Firmware 1.42 Is Solution
« Reply #24 on: September 05, 2011, 08:58:16 AM »
Yeah sorry. There's about 40 different threads with people asking the same thing.
PM me for TFTP / Boot Images / Recovery files  LSRecovery.exe file.
Having network issues? Drop me an email: info@interwebnetworks.com and we will get it fixed!