Author Topic: Problem with LinkStation Live - LS-CH2.0TL  (Read 2762 times)

sandermc

  • Calf
  • *
  • Posts: 7
Problem with LinkStation Live - LS-CH2.0TL
« on: January 07, 2011, 01:12:55 pm »

Hey,

 

I'd problems with LS-CH2.0TL. I'd Belkin Router and connect it with my LS-CH2.0TL. 3 days all works fine, but now when I set switch to On, Auto, Off state device is always ON!!! I need only disconnect power cord for device off. Also device is always blinked in top and function button also. Device firmware is 1.37

What can this be?

 

Thanks you a lot,

Sander


sethz

  • El Toro
  • ****
  • Posts: 252
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #1 on: January 07, 2011, 03:39:25 pm »

-Go into the web interface

-Click on System

-Click "Restore/Initialize"

-Click "Restore Linkstation"

This will reset the settings on the unit without harming any data.

 

See if the problems persist after this


sandermc

  • Calf
  • *
  • Posts: 7
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #2 on: January 08, 2011, 11:38:25 am »

Hi,

 

Thanks for reply, but I couldn't go to web interface. 

Another question for you, could I connect my device directly to computer? through network cable or usb? and if network cable - what IP I must use for web interface?

 

BR,

Sander


sandermc

  • Calf
  • *
  • Posts: 7
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #3 on: January 10, 2011, 09:09:58 am »

Any help????


drmemory

  • Big Bull
  • *****
  • Posts: 1152
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #4 on: January 11, 2011, 03:03:28 pm »

*bump*


Jotin

  • Big Bull
  • *****
  • Posts: 4201
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #5 on: January 11, 2011, 04:12:36 pm »

To get to the interface open up the nas navigator. Right click on the icon for the unit and select open settings page. From here, follow Seth's settings. 


sandermc

  • Calf
  • *
  • Posts: 7
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #6 on: January 20, 2011, 08:14:05 am »

Hi!

I couldn't even see my device through NAS Navigator, when I start setup - it couldn't find any Linkstation devices. Is it possible to make hard reset? Any help or may be you can advice someone in Buffalo for ask?

Sander


Jotin

  • Big Bull
  • *****
  • Posts: 4201
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #7 on: January 20, 2011, 10:15:39 am »

You will want to restore the device using the reset process. This does not delete data or change the file structure. What you do is this.

 

1. Turn off your linkstation

2. While the unit is still off hold the function button for 6 seconds

3. While still holding the function button after 6 seconds you want to flip the power switch to on

4. Once you the function button starts to flash, release the function button and press it again for one second.

 

The power light and function light will blink for awhile. Wait for the power light to become solid and then try and access the NAS from the NasNavi2. You may want to go to http://www.buffalotech.com/support/downloads and download the latest NasNavi which is version 2.31. 


sandermc

  • Calf
  • *
  • Posts: 7
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #8 on: January 21, 2011, 07:14:07 am »

Hi Jotin,

I'm wait for an hour but power/function light doesn't stop for blinking. Could you advice anything else? Or maybe why this happen?


Jotin

  • Big Bull
  • *****
  • Posts: 4201
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #9 on: January 21, 2011, 10:51:10 am »

It could be a firmware issue. I would try following FAQ 3 of 5 to try and recover this unit. If you need any assistance with this FAQ you can always call technical support for help. 


sandermc

  • Calf
  • *
  • Posts: 7
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #10 on: January 21, 2011, 11:57:51 am »

Jotin,

thanks for your help.

 

but what does you mean in this frase?

" I would try following FAQ 3 of 5"

where I can find this FAQ?

 


drmemory

  • Big Bull
  • *****
  • Posts: 1152
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #11 on: January 21, 2011, 12:02:17 pm »

in the stickies at the top of this Storage Board.


sandermc

  • Calf
  • *
  • Posts: 7
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #12 on: January 21, 2011, 12:13:11 pm »

thanks for clarify.


drmemory

  • Big Bull
  • *****
  • Posts: 1152
Re: Problem with LinkStation Live - LS-CH2.0TL
« Reply #13 on: January 21, 2011, 12:28:42 pm »

My pleasure, we should have described where the stickies were, when we mentioned it the first time.