Always Flashing and not connect

[boy_arch]

Hi,

 

My LS-CHLV.2 can not connect with PC/network

From turn power on, blue flash always blink2  and never stop.

I can't connect it.

 

I had try to reset but it's didn't work

 

anybody can help me????

 

 

[Jotin]

Turn off the unit.

 

Hold the function button for 10 seconds while the unit is still off. 

 

While still holding the function flip the power switch to on. 

 

Once the function light starts to blink then release function button and press it again for one second.

 

If this fails to make it boot and it continues to just have a flashing power light then you will have to follow FAQ 3 of 5 that is pinned at the top of the storage forum. 

[boy_arch]

Thanks JOTIn for your response

I have try like that but both of blue light are blink (function and device)

 

What happens with my devic???

 

 

[Jotin]

Give it some time. About 10 minutes. If it does not stop blinking follow FAQ 3 of 5. It sounds like your unit crashed and needs to be recovered.