Author Topic: LS220 WebAccess name invalid?  (Read 5683 times)

tlynch

  • Calf
  • *
  • Posts: 13
LS220 WebAccess name invalid?
« on: November 25, 2020, 02:36:09 PM »
Today when I attempted to access my LS220 on my local network, I am unable to Browse Share from the NAS Navigator2 interface.  When I try to use the WebAccess link in a browser I am told that the name is invalid.

I am able to select Open Settings from the NAS Navigator2 interface, and look at WebAccess settings via the web page that opens. I can click Cancel to go back to the main menu.  If I click OK, or try to edit the settings, I get an error: Verify that DNS settings are correct.

This last bit worries me.  I have not made any DNS changes.  If it doesn't like what is already there, I don't know where my problem is.

Can anyone point me in a likely direction to get either get the existing WebAcess share name recognized, or get a new one registered?

Thanks,
Tom
« Last Edit: November 27, 2020, 10:14:23 AM by tlynch »

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 417
  • Giving you some breathing space.
Re: LS220 WebAccess name invalid?
« Reply #1 on: November 26, 2020, 03:22:32 AM »
"Today when I attempted to access my LS220 on my local network, I am unable to Browse Share from the NAS Navigator2 interface."

first fix this problem
maybe your webaccess will be ok to


Which led status do you have?

Reboot the nas with the on-off switsch
do not cut the power

tlynch

  • Calf
  • *
  • Posts: 13
Re: LS220 WebAccess name invalid?
« Reply #2 on: November 27, 2020, 07:56:25 AM »
Thanks for getting back to me so quickly.

"Which led status do you have?

"Reboot the nas with the on-off switsch
do not cut the power"

Two green LEDs.  The top one blinks occasionally.

I restarted using the power switch.  No change to by situation.
  • Cannot Browse Share
  • Can Open Settings
  • At (IP addr.)/root.html, WebAccess shows On, but Status=not running
  • Under WebAccess advanced settings, if I click OK on current settings, I get a "Verify that DNS settings are correct." error pop-up
  • http://buffalonas.com/index.php still shows my NAS name as invalid
Thanks,
Tom

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 417
  • Giving you some breathing space.
Re: LS220 WebAccess name invalid?
« Reply #3 on: November 27, 2020, 09:08:01 AM »


this leds can not be green

white is normal
red gives you the errorcode

read the manual Chapter11
https://www.buffalo.jp/s3/guide/ls200/global/99/en/pc_index.html?Chapter11#h2anc0

tlynch

  • Calf
  • *
  • Posts: 13
Re: LS220 WebAccess name invalid?
« Reply #4 on: November 27, 2020, 10:06:53 AM »
Sorry. I was looking at the LEDs on the back, near the power switch.

On the front front, a single LED shows solid white.  When I cycle the power using the switch, the LED rapidly flashes white for almost almost two minutes, then settles on solid white.

The only other color that showed was a very brief flash before the rapid white flashing.  It was so brief that I couldn't really say if it was amber or red. Probably red.

Thanks for including the manual.  I will do some reading.  I didn't see any of the flashing patterns documented in chapter 11 that corresponded to error conditions.

I appreciate your help and speedy replies.

Tom

tlynch

  • Calf
  • *
  • Posts: 13
Re: LS220 WebAccess name invalid?
« Reply #5 on: November 27, 2020, 10:17:20 AM »
Only the upper LED was showing, so it seems my Function LED is telling me I have a function problem.  Based on Chapter 8, it sounds like time to initialize my LinkStation.

tlynch

  • Calf
  • *
  • Posts: 13
Re: LS220 WebAccess name invalid?
« Reply #6 on: November 27, 2020, 12:36:49 PM »
I initialized from the Restore/Erase menu, then re-configured using the old settings.

I am now able to access my public and private shares via the web interface again.

Thanks for your help!
Tom