Author Topic: TeraServer TS1200D Does not show up in NAS Navigator  (Read 7963 times)

NK123

  • Calf
  • *
  • Posts: 1
TeraServer TS1200D Does not show up in NAS Navigator
« on: February 06, 2019, 12:02:29 PM »
I just replaced my router, and for whatever reason cannot find the drive any longer.
Does anyone know what I have to do to locate the drive on the network?

1000001101000

  • Debian Wizard
  • Big Bull
  • *****
  • Posts: 1128
  • There's no problem so bad you cannot make it worse
Re: TeraServer TS1200D Does not show up in NAS Navigator
« Reply #1 on: February 06, 2019, 02:58:14 PM »
My first guess is that you had a static ip address assigned to the Terastation which isn't valid on your new network.

ie. the terastation was set to 192.168.0.100, then your network changed from 192.168.0.* to 10.0.0.* or 192.168.1.*

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 417
  • Giving you some breathing space.
Re: TeraServer TS1200D Does not show up in NAS Navigator
« Reply #2 on: February 07, 2019, 12:48:49 AM »
first reboot the nas

flip63

  • Calf
  • *
  • Posts: 1
Re: TeraServer TS1200D Does not show up in NAS Navigator
« Reply #3 on: July 15, 2020, 03:52:21 PM »
I have a similar situation. Different router than before, TS1200D has the same static IP address, which I can ping as well as get to the web interface through my browser. NAS Navigator does not detect it on the network. WIndows 10, Upgraded to Buffalo Firmware 1.6.6. thoughts?

1000001101000

  • Debian Wizard
  • Big Bull
  • *****
  • Posts: 1128
  • There's no problem so bad you cannot make it worse
Re: TeraServer TS1200D Does not show up in NAS Navigator
« Reply #4 on: July 16, 2020, 08:25:57 AM »
A few people have posted about NasNavigator or LS/TSupdater not being able to find devices. The ones I'm familiar with turned out to be because they had switched to a "mesh" network configuration which does not transmit udp broadcast packets across the whole network for performance reasons. I believe there was a configuration option to enable them for certain devices.