Author Topic: failed raid array  (Read 2747 times)

ajaludi

  • Calf
  • *
  • Posts: 1
failed raid array
« on: November 11, 2008, 11:37:56 AM »
   

I have a terastation pro with a corrupted firmware and damaged arrary. Trying to recover the lost data using UFS explorer but not having much luck. Also tried using Raid reconstructor but that can't recreate the array. Any suggestions? Problem happened when one of the drives failed (controller not drive issue).

Rebuilt the array, but as soon as it was done, nothing worked.


admsupport

  • Calf
  • *
  • Posts: 15
Re: failed raid array
« Reply #1 on: November 18, 2008, 09:03:25 AM »
   

Hi, (step from 1 to 3)

Does that help? There is a fee.

http://www.diskinternals.com/raid-recovery/

 

EDIT: if you have some expertise using LINUX, here.

tested with RAID 1 and SCSI disk. RAID 5 or more are likely not to work. It is quite technical.

http://www.unixwiz.net/techtips/recovering-failed-raid.html

 

Finally there. If the recovery fee is not an issue. they have cleanrooms. You will get your data back.

http://www.ontrackdatarecovery.com/raid-recovery/

Message Edited by admsupport on 11-19-2008 12:18 AM