Author Topic: TS5400R, rebuilding indication  (Read 892 times)

VADR

  • Calf
  • *
  • Posts: 2
TS5400R, rebuilding indication
« on: April 27, 2020, 05:00:49 am »
Hi.

I replaced the failed disk in TS5400R and rebuild the array. State of array is "Normal". All drives in the array has state "Array1 / Normal" (pictures 1, 2). But state indicator if TS5400 shows message "Rebuilding: Array1" (picture 3). How can I reset this message?



oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 379
  • Giving you some breathing space.
Re: TS5400R, rebuilding indication
« Reply #1 on: April 27, 2020, 07:53:53 am »
Wait 3 days!
before doing anything.
Do not reboot.

VADR

  • Calf
  • *
  • Posts: 2
Re: TS5400R, rebuilding indication
« Reply #2 on: April 27, 2020, 08:15:30 am »
Wait 3 days!
before doing anything.
Do not reboot.
Almost three weeks have passed.

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 379
  • Giving you some breathing space.
Re: TS5400R, rebuilding indication
« Reply #3 on: April 28, 2020, 12:22:07 am »
you can try to use the fuction button to clear the message

davo

  • Really Big Bull
  • VIP
  • *
  • Posts: 5955
Re: TS5400R, rebuilding indication
« Reply #4 on: April 28, 2020, 11:11:38 am »
Do reboot it and see. Only option at this stage.
PM me for TFTP / Boot Images / Recovery files  LSRecovery.exe file.