Author Topic: Restore data from USB HDD  (Read 60 times)

leonmbarnes2

  • Calf
  • *
  • Posts: 1
Restore data from USB HDD
« on: November 08, 2019, 08:02:10 pm »
How can I restore data from a USB drive to a new NAS?
I purchased an LS210 NAS and it is up and running on my home network.
I also have a HD-CX1 drive attached via USB, NAS Navigator sees this and indicates 186GB are used. This makes sense as it has been used as a backup for an old LS-V2.0. I believe it contains all of the data I need to restore.

LS-V2.0 seems to be booting OK, blue light blinks while starting and after a few minutes is solid blue as if it is on line. However I can no longer connect to it over the network, seems to be a problem with the Ethernet port

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 362
  • Giving you some breathing space.
Re: Restore data from USB HDD
« Reply #1 on: November 11, 2019, 12:13:55 am »
LS-V2.0l uses SMB1
Windows 10 has desabled this protokoll

enable SMB1 on windows or enable smb2 on the nas

https://www.buffalotech.com/knowledge-base/windows-10-cannot-access-shares-on-nas