Author Topic: blinking lights  (Read 341 times)

marionholt

  • Calf
  • *
  • Posts: 2
blinking lights
« on: June 18, 2019, 11:42:57 pm »
My link station model number LS-wxlaab has suddenly stopped reading I'm not sure I understand the blinking lights a blue light is solid and the amber light I guess that's the third light blinks one time goes off then blinks two more times I'm not understanding the charts for that can someone help me

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 362
  • Giving you some breathing space.
Re: blinking lights
« Reply #1 on: June 19, 2019, 01:54:36 am »
Page 191 from
http://manual.buffalo.jp/buf-doc/35020118-02_EN.pdf

I21 Checking the hard drive

marionholt

  • Calf
  • *
  • Posts: 2
Re: blinking lights
« Reply #2 on: June 19, 2019, 06:19:01 pm »
Thanks
So I'm assuming that the link station is checking the hard drive Integrity I set this up as a raid one so if one drive went bad I can just read the other Drive unfortunately when I try to read both rise it says it needs to be formatted I'm not sure what's the next step
Get Outlook for Android

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 362
  • Giving you some breathing space.
Re: blinking lights
« Reply #3 on: June 20, 2019, 05:24:05 am »
Maybe you have I12
I12 Operating in degraded mode.

if your files are readable
start making a backup

if not

power off
remove one disk
start the nas

if your files are readable
start making a backup

if not
power off
remove the other disk and put the first removed back on his original place
start the nas...







after that open ssh analyse the disks with your nas
https://forum.nas-hilfe.de/festplatten-und-ssd-laufwerke/pruefung-einer-festplatte-unter-linux-t1291.html