ok all was working very well for 4+ years with no problems at all, i then had a power cut in my house and when power came back on the nas was in EM MODE on BUFFALO NAS Navigator2 as seen in photos i then tried ls_series-v174 to do update again this also filed as seen in photos here
https://ibb.co/Zz2NnRJdrives that where in the nes when it failed are 1 WD 2TB green & 1 hitachi Deskstar 500GB
this is now where i'm at
pulled all drives and cleaned all dust from nas
put drives back power up nas
i get some blue blinking blue light (Function LED) on setup and then a solid Blue LED: Power on
i then open LSUdate find my nas and hit update and get Partition not detected i then hit yes continue update at this point i get format failednext i tried
to edit the LSUpdater with this
[Application]
Title = BUFFALO LinkStation Series Updater Ver.1.74
WaitReboot = 1200
WaitFormat = 600
WaitFileSend = 600
WaitDiscover = 120
[Target]
ProductID = 0x00000011
ProductID2 = 0x00000012
ProductID3 = 0x00000013
ProductID4 = 0x00000014
ProductID5 = 0x00003006
ProductID6 = 0x00003007
ProductID7 = 0x00000015
ProductID8 = 0x00000016
ProductID9 = 0x00003008
ProductID10 = 0x00004001
ProductID11 = 0x00000017
ProductID12 = 0x00000019
ProductID13 = 0x00000020
ProductID14 = 0x00003010
Name = LinkStation
[Flags]
VersionCheck = 0
NoFormatting = 0
[SpecialFlags]
Debug=1
closed LSUdate and re opened
on the top left i go into Debug Mode
first i try default setting
update BOOT
update KERNEL
update initrd
update rootfs
do not check version and click ok hit update and get the fails in photos
i then go back to Debug Mode
update BOOT
update KERNEL
update initrd
update rootfs
do not check version
and now click force update
still getting the fails in photos
i have also tried settings in Debug Mode
rebuild partition table
and delete user partition
still getting the fails in photos
so at this stage i pull all old drives and put in new ones
first with 2 drives in power up nas
and follow whats above all over again still getting the fails in photos
i have tried only using one drive still nothing
new hdd are
3 WD red 2TB new
2 WD green 2TB NEW
1 SAMSUNG 500GB NEW
ALL come back saying Partition not detected i then hit yes continue update at this point i get format failed
all this is done with my AV off
i also see a red led lite up in side nas never seen this before as i all ways put cover back on after drives
thanks for your time