Author Topic: LS420D with USB tries to use SMBv1  (Read 168 times)

Grandad

  • Calf
  • *
  • Posts: 2
LS420D with USB tries to use SMBv1
« on: March 18, 2019, 12:24:46 pm »
My LS420D is fine using SMBv2 when powered on by itself but if I power it up with an HD-LBU3 USB Drivestation attached, the PC complains that the LS is attempting to use SMBv1!  If I power up the Drivestation after the Linkstation is booted then all is good.  Does perhaps the USB drive force the LS to run SMBv1?

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 334
  • Giving you some breathing space.
Re: LS420D with USB tries to use SMBv1
« Reply #1 on: March 19, 2019, 02:48:08 am »
which howto do you use to set
max protocol = SMB2

use this
http://forums.buffalotech.com/index.php?topic=24630.0