Author Topic: Cannot access files or web admin on LS-X1  (Read 230 times)

richiep

  • Calf
  • *
  • Posts: 3
Cannot access files or web admin on LS-X1
« on: February 25, 2019, 12:00:49 pm »
Hi there

I have an LS-X1.0TL-EU I have been running for a few years.

All of a suddent today I can't access the files. I also can't access the webpage admin at the ip address of the NAS.

I have run NAS Navigator and it shows up the device and doesn't indicate any errors. The ip address is correct.

The firmware version shows as 1.74 and I can't find a more up to date version.

The LSUpdater software shows that there is no device found that needs updating.

I also get no reply when i ping the ip address of the NAS.

Any suggestions how I can get this back please?

Thanks in advance.

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 334
  • Giving you some breathing space.
Re: Cannot access files or web admin on LS-X1
« Reply #1 on: February 26, 2019, 06:03:24 am »
first try a Windows 7 or winxp pc as Client
Read About SMB1

richiep

  • Calf
  • *
  • Posts: 3
Re: Cannot access files or web admin on LS-X1
« Reply #2 on: February 26, 2019, 06:41:46 am »
So, this is weird.

I don't have any computers running a different OS but thought I'd humour your idea as it doesn't make any sense.

However, I can access the files on a different laptop, also running Windows 10.

Now I'm a bit baffled.

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 334
  • Giving you some breathing space.
Re: Cannot access files or web admin on LS-X1
« Reply #3 on: February 26, 2019, 09:16:10 am »
Windows 10 with all actual updates have SMB1 disabled.
Your old nas do not have SMB2 enabled.

Enable SMB1 on Windows 10

http://forums.buffalotech.com/index.php?topic=25001.0

richiep

  • Calf
  • *
  • Posts: 3
Re: Cannot access files or web admin on LS-X1
« Reply #4 on: February 27, 2019, 03:19:21 am »
Hi there

This sort of happened the other way round.

There was an update that hadn't installed. I restarted the computer and it now works.

I didn't change anything. Strange how the old simple magic restart can resolve some things like this.

Thanks for your replies.