Author Topic: LS420d does not boot  (Read 2428 times)

artitech

  • Calf
  • *
  • Posts: 1
LS420d does not boot
« on: September 10, 2018, 02:54:32 PM »
 Hi , we have a LS420d2020 , it's not working ' when we turned on the power light went amber and flashing , 2 time long and 5 time short.
I could not access to NAS with the NAS navigator .

Could you help us?

Eastmarch

  • 1500 Lb Water Buffalo
  • Administrator
  • *****
  • Posts: 339
Re: LS420d does not boot
« Reply #1 on: September 12, 2018, 05:16:37 PM »
Hmm, that's an I25,

http://buffalo.jp/support_s/guide2/manual/ls/400/99/en/pc_index.html?Chapter10

I'd try to see if the firmware updater detects the unit and rerun it. If it got interrupted mid update, or there's a drive failure, this might happen.


**A single copy of data, even on a RAID array, is NOT a backup! Hard drive failure is not a question of IF, but WHEN! Don't take my word for it, take Google's!**

laksjan

  • Calf
  • *
  • Posts: 19
Re: LS420d does not boot
« Reply #2 on: May 10, 2020, 02:15:07 PM »
Are you using 2 different sizes of drives? Check your RAID.