Author Topic: Where do i put the router settings?! :-(  (Read 89 times)

tareko

  • Calf
  • *
  • Posts: 4
Where do i put the router settings?! :-(
« on: August 05, 2018, 04:52:28 pm »
Hi All,
I have a Airstation N450 Giga.
for the initial setup i am trying to connect to the router wirelessly to set it up. I connect to the router and see the admin panel.

I have the details listed below to connect to my ISP.
cannot find where to put them in the router at all?
Help please!
Thanks

Connection settings for manual connection
Always on broadband xDSL
Dial-up access (BT Line)    N/A
Dial-up access (non-BT Line)    N/A
Login name    xxxx@plusdsl.net
Password    ********
Authentication Method    CHAP
Server type    PPP
IP Address    Server assigned
Other settings for manual connection
Primary DNS Server    212.15x.xx.xx
Secondary DNS Server    212.15x.xx.xx
 
POP3 (incoming mail) Server    mail.plus.net
POP3 login name    xxxx@plusdsl.net
POP3 password    ********
IMAP Server    imap.plus.net
SMTP (outgoing mail) Server    relay.plus.net
Your email address    yourname@xxxxxxxplus.com
News Server   usenet.plus.net
NTP Server   ntp.plus.net

davo

  • Really Big Bull
  • VIP
  • *
  • Posts: 5837
Re: Where do i put the router settings?! :-(
« Reply #1 on: August 05, 2018, 05:16:43 pm »
What firmware version are you using?
PM me for TFTP / Boot Images / LSRecovery.exe file.

tareko

  • Calf
  • *
  • Posts: 4
Re: Where do i put the router settings?! :-(
« Reply #2 on: August 05, 2018, 05:22:05 pm »
hi,
 
Firmware: DD-WRT v24SP2-MULTI (09/27/12)

tareko

  • Calf
  • *
  • Posts: 4
Re: Where do i put the router settings?! :-(
« Reply #3 on: August 05, 2018, 05:26:01 pm »
just found this.
Should i upgrade? If so, which one?
ftp://ftp.dd-wrt.com/betas/2014/04-18-2014-r23919/buffalo_wzr_hp_g450h/

tareko

  • Calf
  • *
  • Posts: 4
Re: Where do i put the router settings?! :-(
« Reply #4 on: August 08, 2018, 02:33:22 am »
any help please

davo

  • Really Big Bull
  • VIP
  • *
  • Posts: 5837
Re: Where do i put the router settings?! :-(
« Reply #5 on: August 08, 2018, 03:58:05 am »
In Setup -> Basic setup, use the following:

Connection type: PPPoE
Username: Plusnet username
Password: Plusnet Password

Apply the settings at the bottom of the page.

Done, there are no other settings needed. Make sure that your modem is connected into the blue port in the Buffalo.
PM me for TFTP / Boot Images / LSRecovery.exe file.

ryanchapman

  • Calf
  • *
  • Posts: 2
  • Photographer & Image Retoucher
    • Cloud Clipping Path
Re: Where do i put the router settings?! :-(
« Reply #6 on: August 12, 2018, 05:51:11 am »
Hey,
Which firmware have you use?
-Ryan Chapman
-Professional photographer and photo retoucher
-Cloud Clipping Path