« previous next »
Pages: [1]

Author Topic: E13 on Model LS-WX2.0TL/R1  (Read 1528 times)

Funken_A

  • Calf
  • *
  • Posts: 4
E13 on Model LS-WX2.0TL/R1
« on: July 11, 2018, 05:25:11 PM »
Had an Array Error in the process of trying to rebuild it and I've been getting E13 flashing lights for about 24 hours.

I was able to connect to web pages but as of this post now I cannot.. What is next

RAID 1 Array 1
Logged

Funken_A

  • Calf
  • *
  • Posts: 4
Re: E13 on Model LS-WX2.0TL/R1
« Reply #1 on: July 11, 2018, 06:26:34 PM »
Now its just pulsing 06.....  I see no corresponding info in the manual for my unit and this code
Logged

Funken_A

  • Calf
  • *
  • Posts: 4
Re: E13 on Model LS-WX2.0TL/R1
« Reply #2 on: July 11, 2018, 08:15:44 PM »
SO I swapped the discs because it was the only info I could find regarding  E06... Now I can get a red light coming from the back of drive #2. I am also blinking E13 again. I can get back into the web pages and it says Error Drive #2 as well as Array 1 Error.

Logged

Funken_A

  • Calf
  • *
  • Posts: 4
Re: E13 on Model LS-WX2.0TL/R1
« Reply #3 on: July 13, 2018, 05:23:49 PM »
well can safely say this is a brand I will never trust again. Absolutely no input what so ever
Logged

oxygen8

  • The Oxy-genuine article
  • El Toro
  • ****
  • Posts: 417
  • Giving you some breathing space.
Re: E13 on Model LS-WX2.0TL/R1
« Reply #4 on: July 14, 2018, 06:09:01 AM »
Logged
Pages: [1]
« previous next »