I ran a long test as well. Looks like it's indicating a problem with Drive A. Can you confirm?
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.05.06 21:34:33 =~=~=~=~=~=~=~=~=~=~=~=
login as: root
root@192.168.1.5's password:
root@Family:~# smartctl -d marvell -t long /dev/sda
smartctl version 5.37 [arm-none-linux-gnueabi] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 227 minutes for test to complete.
Test will complete after Mon May 7 01:22:01 2018
Use smartctl -X to abort test.
root@Family:~# smartctl -d marvell -a /dev/sda
smartctl version 5.37 [arm-none-linux-gnueabi] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===
Device Model: ST2000DM001-1CH164
Serial Number: W1E6EZQK
Firmware Version: CC27
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 9
ATA Standard is: Not recognized. Minor revision code: 0x1f
Local Time is: Mon May 7 07:39:42 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 592) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 227) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 092 092 006 Pre-fail Always - 214674476
3 Spin_Up_Time 0x0003 098 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 179
5 Reallocated_Sector_Ct 0x0033 096 096 010 Pre-fail Always - 5080
7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 355184808
9 Power_On_Hours 0x0032 061 061 000 Old_age Always - 34308
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 179
183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Unknown_Attribute 0x0032 088 088 000 Old_age Always - 12
188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Temperature_Celsius 0x0022 064 049 045 Old_age Always - 706805796
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 179
193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always - 22676
194 Temperature_Celsius 0x0022 036 051 000 Old_age Always - 36 (Lifetime Min/Max 0/21)
197 Current_Pending_Sector 0x0012 093 024 000 Old_age Always - 1208
198 Offline_Uncorrectable 0x0010 093 024 000 Old_age Offline - 1208
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 97096325694978
241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 2644126549
242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 6048040636
SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 occurred at disk power-on lifetime: 33839 hours (1409 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 ff ff ff 4f 00 00:02:28.384 READ DMA EXT
35 00 08 a8 58 9f 40 00 00:02:28.384 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:24.716 READ DMA EXT
35 00 08 f0 e4 1e 40 00 00:02:24.716 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:21.041 READ DMA EXT
Error 11 occurred at disk power-on lifetime: 33839 hours (1409 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 ff ff ff 4f 00 00:02:24.716 READ DMA EXT
35 00 08 f0 e4 1e 40 00 00:02:24.716 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:21.041 READ DMA EXT
35 00 10 e0 e4 1e 40 00 00:02:21.041 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:17.373 READ DMA EXT
Error 10 occurred at disk power-on lifetime: 33839 hours (1409 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 ff ff ff 4f 00 00:02:21.041 READ DMA EXT
35 00 10 e0 e4 1e 40 00 00:02:21.041 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:17.373 READ DMA EXT
35 00 08 08 d8 4e 40 00 00:02:17.373 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:13.714 READ DMA EXT
Error 9 occurred at disk power-on lifetime: 33839 hours (1409 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 ff ff ff 4f 00 00:02:17.373 READ DMA EXT
35 00 08 08 d8 4e 40 00 00:02:17.373 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:13.714 READ DMA EXT
35 00 08 a8 58 9f 40 00 00:02:13.714 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:10.083 READ DMA EXT
Error 8 occurred at disk power-on lifetime: 33839 hours (1409 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 ff ff ff 4f 00 00:02:13.714 READ DMA EXT
35 00 08 a8 58 9f 40 00 00:02:13.714 WRITE DMA EXT
25 00 01 ff ff ff 4f 00 00:02:10.083 READ DMA EXT
35 00 10 90 99 9e 40 00 00:02:10.080 WRITE DMA EXT
35 00 08 78 59 52 40 00 00:02:10.079 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 34300 1952017424
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@Family:~# smartctl -d marvell -t on long /dev/sdb
smartctl version 5.37 [arm-none-linux-gnueabi] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 226 minutes for test to complete.
Test will complete after Mon May 7 11:31:25 2018
Use smartctl -X to abort test.
root@Family:~# smartctl -d marvell -a /dev/sdb
smartctl version 5.37 [arm-none-linux-gnueabi] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===
Device Model: ST2000DM001-1CH164
Serial Number: W1E6EZZK
Firmware Version: CC27
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 9
ATA Standard is: Not recognized. Minor revision code: 0x1f
Local Time is: Mon May 7 12:26:19 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 592) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 226) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 241158264
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 179
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 62485148
9 Power_On_Hours 0x0032 061 061 000 Old_age Always - 34316
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 179
183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Temperature_Celsius 0x0022 065 050 045 Old_age Always - 689897507
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 179
193 Load_Cycle_Count 0x0032 076 076 000 Old_age Always - 49239
194 Temperature_Celsius 0x0022 035 050 000 Old_age Always - 35 (Lifetime Min/Max 0/20)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 22527103501832
241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 6520392768
242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 2195986654
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 34315 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@Family:~# exit
logout