I've been trying to get our TS-7000 (TS-2rz) to join our windows server 2008 r2 active directory domain. So far, I have been unsuccessful in doing so. I have followed the KB article, and various videos available. My attempts have always resulted in failure.
The nas is reporting that the latest and greatest firmware is applied. The time and timezone are set the same as the DC, as the TS uses the DC as it's NTP server.
The AD DNS on the DC has the NAS in the dns in both forward and reverse zones. The netbios, dns and controller name are correct in the setup dialog. The NAS has the DC listed as the primary DNS, with another windows server DC listed as the secondary. The only thing I haven't tried yet on the NAS is unbonding the four nics and using only one of them.
The error messages in the log are below.
Feb 28 19:37:08 B4DATA nasapi:ERROR [network.py:1167] <20024,140445430576896> set_auth_settings - ad_domain : take ad_domain failed.
Feb 28 19:37:08 B4DATA nasapi:ERROR [NasApiException.py:91] <20024,140445430576896> __init__ - EXCEPTION NasApiException code=-116 (Failed to Operate) data={'ad_domain': 'take ad_domain failed.'} None
Does anyone have any ideas on what to try next?