Author Topic: LS441D  (Read 1398 times)


  • Calf
  • *
  • Posts: 1
« on: January 27, 2018, 06:01:01 pm »
I had a faulty drive on bay 1 of my LS441D NAS, I shut down the system took the drive out replace it but when I put the drive into the bay 1 the system will not completely boot as Navigator cant find the system and no web access too.  I took the drive and installed on bay 3 and everything works ok and now the raid 1 is rebuilding.  The problem is that now bay 1 is still showing Disk 1 Failed But there is no drive there anymore also the led for bay one is always off. Is there any way to clear this error?